The Rebeltec H1065 GaN charger is a type of charger that uses gallium nitride semiconductor elements - hence its name. GaN is an abbreviation for the chemical names of gallium (Ga) and nitrogen (N). This chemical compound is used as a semiconductor material in GaN chargers, as opposed to traditional silicon (Si). GaN technology makes chargers more compact, lighter, and more efficient compared to traditional silicon ones. Gallium nitride is therefore used to improve performance, size efficiency, and operating temperature. GaN technology chargers enable faster charging of smartphones, tablets, laptops, and even electric cars.#13#10#13#10Power Delivery 3.0 is a new charger standard. With the new variant of the USB Type-C port, it has become possible to transmit higher power through the most popular input standard on the market. It is now possible to charge various devices faster: notebooks, smartphones, tablets, cameras, Bluetooth speakers, and headphones, among many others. With a power of 45W, you can charge your devices even faster.#13#10#13#10The Rebeltec H1045 charger is equipped with Quick Charge (QC) technology - simply fast charging in Polish. It is based on increasing the voltage flowing to the charged device to quickly raise the battery level to about 50-60%, before slowing down. This second phase of charging aims to ensure the safety of the battery and user and to avoid potentially dangerous failures resulting from cell damage or overheating of the phone.#13#10#13#10The REBELTEC H1045 charger is equipped with the PPS protocol - which stands for Programmable Power Supply - a standard under USB Power Delivery (USB PD) that enables dynamic adjustment of voltage and current supplied to the charging device. Traditional chargers often offer fixed voltages (e.g., 5V, 9V, 12V, 20V). PPS, however, allows for voltage adjustment in small steps, usually every 20mV, in the range from 3.3V to 21V. Almost every smartphone manufacturer has its own fast charging system dedicated to its devices. Therefore, there arose a need for a kind of standardization of fast charging technology. In response, the PPS protocol - Programmable Power Supply was created. It is a charging scheme that can be used to charge various devices regardless of the brand. It introduced additional communication between the device and the charger during the entire charging process. This allows for adjusting not only the charging current but also the voltage. As a result, the battery is even better protected against excessive energy and overheating.#13#10#13#10Included with the charger is a 2m USB-C to USB-C cable with a maximum throughput of 5A (100W). In the case of wanting to charge Apple devices, it is sufficient to change the cable to USB-C to Lightning.#13#10#13#10SPECIFICATION:#13#10#13#10Very fast wall charger operating in PD65W technology#13#10#13#10Maximum power 65W#13#10#13#10Compatible with technologies: PD3.0, PPS, QC3.0, ANF temperature control#13#10#13#10One USB Type-C port#13#10#13#10Designed for charging notebooks, phones, tablets, power banks, Bluetooth speakers and headphones, and other USB-powered devices#13#10#13#10Length of included cable 2m#13#10#13#10Maximum cable power: 100W (5A)#13#10#13#10Input voltage: 100-240V~50/60Hz 1.2A#13#10#13#10Power (PDO):#13#10#13#105V / 3A#13#109V / 3A#13#1012V / 3A#13#1015V / 3A#13#1020V / 3.25A#13#10#13#10Protections:#13#10#13#10OVER-CURRENT PROTECTION, OVER-POWER PROTECTION, OVER-VOLTAGE PROTECTION, OVER-CHARGE PROTECTION, OVER-TEMPERATURE PROTECTION, SHORT-CIRCUIT PROTECTION, LOW VOLTAGE PROTECTION#13#10#13#10Net weight 109g#13#10#13#10EAN code 5902539602227
